简要说明：

测量范围	10-99,999 rpm (@ 1 pulse per rev.) 0.2-30,000 rpm (@ 60 pulses per rev.)
显示范围	转速计：0 - 999999 (小数点可选) 运行时间：0:00:00 - 9:59:59 or   0.00 - 999.99 sec. 处理时间：0:00:00 - 0:59:59 or 0.00 - 999.99 sec.
精度	转速计 & 运行时间：±   0.008 % ± 1 digit 处理时间：± 0.008 % ± 1 digit
供电范围	85 – 264VAC, 50/60Hz
用途	测量马达转速，皮带速度差的比率，搅拌站的速度以及热处理炉皮带经过时间

概述

转速计，又名转速表、转速仪，是机械行业必备的仪器之一，用来测定电机的转速、线速度或频率。常用于电机、电扇、造纸、塑料、化纤、纺织、汽车、飞机、轮船等制造业。 大多常用的为手持离心式转速计。

转速计，又名转速表、转速仪，是机械行业必备的仪器之一，用来测定电机的转速、线速度或频率。常用于电机、电扇、造纸、塑料、化纤、纺织、汽车、飞机、轮船等制造业。 大多常用的为手持离心式转速计。美国Checkline旗下的转速计一般为数字式，有接触式和非接触式两种测量。非接触式采用光电器件测量，无连接轴，对被测件无任何影响，提高测量精度。

例如Checkline DT-5TXR型是一款带输出模块的面板式转速表，拥有三种测量模式：转速，线速和速率。

The Check-line DT-5TXR panel meter with optional output Modules is an economical unit for speed and process time monitoring when combined with a compatible in-line sensor. Loaded with features found in more expensive units, the DT-5TXR Panel Meter is extremely versatile with selectable inputs. The DT-5TXR is fully scalable and possesses three selectable modes allowing it to measure RPM/linear speed/rate, elapsed time and process time. Each panel meter accepts a variety of signal inputs from any sensor providing an NPN, contact, sine wave, or square wave such as pulse generators, proximity sensors, photoelectric sensors, magnetic sensors and NPN OC transistors. Typical applications can range from machining operation timing, rate of change monitoring such as on a conveyor, elapsed time of oven curing etc. with any variety of compatible sensor inputs desired. The DT-5TXR panel meter also accepts various output modules, enabling it to output data for analysis, record keeping or assist in controlling the process through a separate control device. Up to two modules can be accepted simultaneously, offering an enormous number of combinations and options.

特性

1. Large 6 digit LED display plus two smaller 6 digit secondary displays allow easy viewing from greater distances

2. Highly accurate (± 0.008% ± 1 digit) makes ideal for process control and analysis

3. Selectable update time allows operator to speed up/slow down display changes to facilitate process

4. Selectable decimal point enables higher resolution display potential 1/8 DIN size panel cut out permits easy, industry-standard mounting

5. Great versatility with multiple sensor input capability in one unit: NPN open collector, contact and square or sine wave sensor inputs

6. Accepts up to two output modules allowing voltage, current, BCD, NPN & relay output combinations for control or remote process monitoring

7. IP66 front cover protection keeps water out, enables usage in compatible plant wash-down operations

8. Wide power range (85 – 264VAC, 50/60Hz) eliminates need for having to purchase and wire an additional power transformer.

9. Scalable programming gives user the flexibility to set up and monitor virtually any process

10. 24V DC-Powered model available, DT-5TXR-DC

11. DC power source output to power compatible sensors saves money by eliminating need for separate power supply

12. Front cover protection eliminates accidental bumping of keypad to incorrect program

13. Up to two (2) Optional Output Modules can be used simultaneously

14. 
    

参数

订货

配件

DOP-BCDR    BCD output module, 36 Pin Connection 

DOP-CPTR    Relay output module, terminal block connection

DOP-FVC Analog output module (4-20mA & 0-1, 0-10, 1-5 VDC), 36-pin connection

DOP-FVTR    Analog output module, terminal block connection  

DOP-RMTR    Ratio input module, terminal block connection  

DOP-TRC NPN open collector output module, 36 pin connection 

DOP-TRTR   NPN open collector output module, terminal block connection

订货型号

DT-5TXR Panel Meter with Output Module Capability, Selectable inputs, 100-240 VAC Power  

DT-5TXR-DC Panel Meter with Output Module Capability, Selectable inputs, 9-35 VDC Power

型号

相关型号

DJ2-G

BI2-S12

SE-G2

MCS-3109

MP-10

3070-XP12010

3030AN

MCS-655

LS-S50ML

尺寸图