| 详细介绍： 电缆KVVP-6*1.5
电缆使用特性 Application
1 额定电压U0/U为450/750V～600/1000V
U0―任一主绝缘和"地"(金属屏蔽,金属套或周围介质)之间的电压有效值.
U―多芯电缆(电线)或单芯电缆(电线)系统任一两相导体之间的电压有效值.
当电缆(电线)使用于交流系统时,电缆(电线)的额定电压至少应等于该系统的标称电压.当使
用于直流系统时,该系统的标称电压应不大于电缆(电线)额定电压的1.5倍.
系统的工作电压应不大于系统额定电压的1.5倍.
2 电缆导体的长期允许工作温度:
The permitting long-term operating temperature of cable conductor should be
聚氯乙烯绝缘PVC insulation:70℃
化学(硅烷)交联聚乙烯Chemical Sioplascable:90℃
辐照交联聚乙烯Irradiation XLPE:105～135℃
3 电缆的敷设温度应不低于0℃.推荐的允许弯曲半径:
无铠装层的电缆,应不小于的电缆外径的6倍.
有铠装或铜带屏蔽结构的电缆,应不小于的电缆外径的12倍.
有屏蔽层结构的软电缆,应不小于的电缆外径的6倍.
4 电缆电气性能和物理机械性能符合国标GB9330《塑料绝缘控制电缆》的规定要求.
5 阻燃控制电缆的阻燃性能符合(相当IEC332)《电线电缆燃烧试验方法》的规定要求.
6 低烟无卤特性(仅限于低烟无卤阻燃控制电缆:)
无卤性能:符合国际电工委员会标准IEC754《氢卤酸气体逸出量试验》的规定要求.
低烟性能:符合国标GB12666.7《电线电缆燃烧烟浓度试验方法》的规定要求.
低毒性能:符合美国军用标准NES713《毒性指数测定》的规定要求.
三 电缆型号及主要使用范围见下表
1 普通控制电缆型号,名称及主要使用范围见表1
表1 (Table 1)
型号Type 名 称 Designation 主要使用范围Main applications
KVV 铜芯聚氯乙烯绝缘聚氯乙烯护套控制电缆
Copper core PVC insulated and sheathed control cable
敷设在室内,隧道,电缆沟,管道等固定场合
For laying indoor, in tunnels, ducts, conduit etc.
permanent place
KVVP 铜芯聚氯乙烯绝缘聚氯乙烯护套铜丝编织屏蔽控制
电缆
Copper core PVC insulated and sheathed copper wire
shielded control cable
敷设在室内,隧道,电缆沟,管道等要求屏蔽的固定
场合
For laying indoor, tunnels, ducts, conduit etc. permanent
place where shield required
KVVP2铜芯聚氯乙烯绝缘聚氯乙烯护套铜带屏蔽控制电缆
Copper core PVC insulated and sheathed copper tape
shielded control cable
同上
Ditto
KVV22铜芯聚氯乙烯绝缘聚氯乙烯护套钢带铠装控制电缆
Copper core PVC insulated and sheathed steel tape
armoured control cable
敷设在室内,隧道,电缆沟,管道,直埋等固定场合,
能承受较大的机械外力
KVV32铜芯聚氯乙烯绝缘聚氯乙烯护套细钢丝铠装控制电
缆
Copper core PVC insulated and sheathed fine
steel wire armoured control cable
敷设在室内,隧道,电缆沟,管道,竖井等固定场合,
能承受较大的机械拉力
For laying indoor, tunnels, ducts, conduit and
shaft etc. permanent place, able to bear greater
pulling force
KVVR 铜芯聚氯乙烯绝缘聚氯乙烯护套控制软电缆
Copper core PVC insulated and sheathed flexible
control cable
敷设在室内移动,要求柔软等场合
For laying indoor, and flexible required etc.
place, easy to move
KVVRP 铜芯聚氯乙烯绝缘聚氯乙烯护套编织屏蔽控制软电
缆
Copper core PVC insulated and sheathed copper
wire braiding shielded flexible control cable
敷设在室内移动,要求柔软,屏蔽等场合
For laying indoor ,and flexible and shield
required etc. place ,easy to move
ZR-KVV 铜芯阻燃聚氯乙烯绝缘聚氯乙烯护套控制电缆
Copper core PVC insulated and sheathed
flame-retardant control cable
用于热机,热控等固定场合
For being applied on heat engine and heat
controlling appliance
2 阻燃A类控制电缆型号,名称及主要使用范围见表2
Type, designation and main applications of flame-retardant A control cable shown in table 2
表2 (Table 2)
型号
Type
名 称
Designation
主要使用范围
Main applications
ZRA-KVV
ZRA-KYJV
ZRA-KFYJV
阻燃A类铜芯聚氯乙烯绝缘聚氯乙烯护套控制电缆
Flame-retardant A copper core PVC insulated and sheath
control cable
阻燃A 类铜芯交联聚乙烯绝缘聚氯乙烯护套控制电缆
Flame-retardant A copper core XLPE insulated and PVC
sheath control cable
燃A 类铜芯辐照交联聚乙烯绝缘聚氯乙烯护套控制电缆
Flame-retardant A copper core irradiated XLPE
insulated and PVC sheath control cable
敷设于阻燃要求较高的室内,隧道,电缆沟,管
道等固定场合
For laying in the higher requirement for
flame-retardant indoor, in tunnels, ducts, conduit
etc. permanent place
ZRA-KVVP
ZRA-KYJVP
ZRA-KFYJVP
阻燃A类铜芯聚氯乙烯绝缘聚氯乙烯护套铜线编织屏
蔽控制电缆
Flame-retardant A copper core PVC insulated and sheath
copper wire braiding shield control cable
阻燃A类铜芯交联聚乙烯绝缘聚氯乙烯护套铜线编织
屏蔽控制电缆
Flame-retardant A copper core XLPE insulated and PVC
sheath copper wire braiding shield control cable
阻燃A类铜芯辐照交联聚乙烯绝缘聚氯乙烯护套铜线
编织屏蔽控制电缆
Flame-retardant A copper core irradiated XLPE
insulated and PVC sheath copper wire braiding shield
control cable
敷设于阻燃要求较高的室内,隧道,电缆沟,管
道等要求屏蔽的固定场合
For laying in the higher requirement for
flame-retardant indoor, tunnels, ducts, conduit etc.
permanent place where shield required
ZRA-KVVP2
阻燃A类铜芯聚氯乙烯绝缘聚氯乙烯护套铜带屏蔽控
制电缆
Flame-retardant A copper core PVC insulated and sheath
copper tape shield control cable
敷设于阻燃要求较高的室内,隧道,电缆沟,管
道等要求屏蔽的固定场合
For laying in the higher requirement for
flame-retardant indoor, tunnels, ducts, conduit etc.
ZRA-KYJVP2
ZRA-KFYJVP2
阻燃A类铜芯交联聚乙烯绝缘聚氯乙烯护套铜带屏蔽
控制电缆
Flame-retardant A copper core XLPE insulated and PVC
sheath copper tape shield control cable
阻燃A类铜芯辐照交联聚乙烯绝缘聚氯乙烯护套铜带
屏蔽控制电缆
Flame-retardant A copper core irradiated XLPE
insulated and PVC sheath copper tape shield control
cable
permanent place where shield required
ZRA-KVV22
ZRA-KYJV22
ZRA-KFYJV22
阻燃A类铜芯聚氯乙烯绝缘聚氯乙烯护套钢带铠装控
制电缆
Flame-retardant A copper core PVC insulated and sheath
steel tape armoured control cable
阻燃A类铜芯交联聚乙烯绝缘聚氯乙烯护套钢带铠装
控制电缆
Flame-retardant A copper core XLPE insulated and PVC
sheath steel tape armoured control cable
阻燃A类铜芯辐照交联聚乙烯绝缘聚氯乙烯护套钢带
铠装控制电缆
Flame-retardant A copper core irradiated XLPE
insulated and PVC sheath steel tape armoured control
cable
敷设在室内,隧道,电缆沟,管道,直埋等有较
高阻燃要求的固定场合,能承受较大的机械外
力.
For laying in the higher requirement for
flame-retardant indoor, tunnels, ducts, conduit
direct burial etc. permanent place, able to bear
greater mechanical force etc.
ZRA-KVV32
ZRA-KYJV32
ZRA-KFYJV32
阻燃A类铜芯聚氯乙烯绝缘聚氯乙烯护套细钢丝铠装
控制电缆
Flame-retardant A copper core PVC insulated and sheath
fine steel wire armoured control cable
阻燃A类铜芯交联聚乙烯绝缘聚氯乙烯护套细钢丝铠
装控制电缆
Flame-retardant A copper core XLPE insulated and PVC
sheath fine steel wire armoured control cable
阻燃A类铜芯辐照交联聚乙烯绝缘聚氯乙烯护套细钢
丝铠装控制电缆
Flame-retardant A copper core irradiated XLPE
insulated and PVC sheath fine steel wire armoured
control cable
敷设在室内,隧道,电缆沟,管道,竖井等有较
高阻燃要求的固定场合,能承受较大的机械拉
力.
For laying in the higher requirement for
flame-retardant indoor, tunnels, ducts, conduit
shaft etc. permanent place, able to bear greater
mechanical force etc.
ZRA-KVVR 阻燃A类铜芯聚氯乙烯绝缘聚氯乙烯护套控制软电缆
Flame-retardant A copper core PVC insulated and sheath
flexible control cable
敷设在室内移动,要求柔软的场合,阻燃等级A
类
For laying indoor, and flexible required etc. place,
easy to move, flame-retardant A.
ZRA-KVVRP 阻燃A类铜芯聚氯乙烯绝缘聚氯乙烯护套铜线编织屏
蔽控制软电缆
Flame-retardant A copper core PVC insulated and sheath
copper wire braiding shield flexible control cable
敷设在室内移动,要求柔软,屏蔽的场合,阻燃
等级A类
For laying indoor, and flexible and shield required
place, easy to move, flame-retardant A.
说明Note:1,ZRA――表示阻燃且阻燃等级为A类.Means flame-retardant class A
2,可按用户要求,生产表中所列以外型号的A类阻燃控制电缆.
Flame-retardant A control cable can be manufactured according to the requirements of
customers except the types in Tables.
3. 特种阻燃控制电缆 Special flame-retardant control cable
3.1 特种阻燃含义为:在阻燃A类等级的基础上,再加挤一层高阻燃材料的内护套,使电缆的阻燃效果更
强.
The special flame-retardant means to add one more layer inner sheath of high flame-retardant
material so that the result more better for flame-retardant.
3.2 电缆型号,名称及主要使用范围见表3.Type, designation and applications is shown in Table 3
|
放大图片
暂无相关下载
