详细介绍:
3HAC028357-001
1785-KA5
1756-IC16
RUSB-02
pc-e984-258
特价现货供应
PLC:Allen-Bradley(AB)全系列,Schneider(施耐德)140,GE 通用电气 IC693 IC697 ,西门子 300 400 PLC
DCS:西屋 ovation,福克斯波罗 ,ABB 贝利 INFI90,TRICONEX ESD
伺服驱动/电机:FANUC,Rexroth,KUKA, ABB 机器人,Schneider LX17
板卡:摩托罗拉 Rexroth ABB KUKA Siemens GE MOORE Siemens
_________________________________________________
厦门航拓电气有限公司
xiamen hangtuo Electric Co., Ltd.
地 址:厦门市思明区仙岳路582号嘉怡园16楼 A单元
联系人:王先生
QQ:250421214
T:0592-5072097
P:18965131350
F:0592-5072083
www.xmhtdq.com
___________________________________________________
(诚信经营)(质量可靠)(进口正品)(顺丰空运)Selecting the motor degree of protection
Effects Liquid/fluid
General
workshop
environment
Water;
General, cooling–lubricating medium
(95 % H2O; 5 % oil);
oil
Penetrating oil;
Petroleum;
aggressive cooling–lubricating
medium
Dry IP 64 – –
Environment where liquids and fluids are
present
– IP 641) IP 67
Mist – IP 65 IP 67
Spray – IP 65 IP 68
Jet – IP 67 IP 68
Splash;
brief immersion;
continuous flooding
– IP 67 IP 68
IP 1st code (0–6): Degree of protection against contact and the
ingress of foreign bodies
2nd code (0–8): Degree of protection against the ingress of water
(no protection against oil)
Operating temperature range: –15 °C to+40 °C.
All of the catalog data refer to an ambient temperature of 40 °C and assume
that the equipment is not mounted so that it is thermally insulated. The following
de–rating must be applied for ambient temperatures greater than 40 °C
to 45 °C 96%
to 50 °C 92%
to 55 °C 87%
to 60 °C 82%
Non–ventilated (9th position of the Order No.: A)
The power is dissipated by radiation and natural convection, which means that
the motor must be suitably mounted to guarantee adequate heat dissipation.
Servomotors can have high surface temperatures
(> 100 °C). When required, provide touch protection
Forced–ventilation (9th position of the Order No.: S)
Available for selected types (refer to Catalog)
for 1FT5 for shaft heights 71, 100 and 132,
for 1FT6 for shaft heights 80, 100 and 132
Forced ventilation is not available for 1FK6
It is not permissible that the hot discharged air is drawn in again.
1) For the version with holding brake and oil as cooling–lubricating medium: IP 67
30752787-001 DHP Comm. Logic Board 30752787-002 30752787-502
30752787-003 30752787-503 DHP Comm Logic board
30752946-001 30752946-501 DHP Battery Test Crd Assy
30752948-001 DHP Battery Assembly
30754661-011 Fuse, Subminiature, .25 Amp
30754661-014 Fuse, .5 Amp
30754661-021 Fuse, 2 Amp
30754661-022 Fuse, 3 Amp
4DP7APXAD911 4DP7APXAD91 A/D Converter
4DP7APXDH111 4DP7APXDH11 Hiway Cable Interface
4DP7APXDH111 4DP7APXDH11 Hiway Cable Interface
4DP7APXDH222 4DP7APXDH22 Data Hiway DMA
4DP7APXDH233 4DP7APXDH23 Data Hiway DMA
4DP7APXDH244 DHP Data Hiway DMA
4DP7APXMD111 4DP7APXMD11 LE Mux Driver
4DP7APXPM233 4DP7APXPM23 PROM/RAM PWB, LE PIU
51107595-100 History Module P/S
51108088-100 DHI I/O paddle board
51108306-200 Trackball - desktop
51108899-100 LCNFL LCNFL Paddle Board
51109612-100 Torque Wrench for Tap
|