简要说明：martekpower牌的供应martekpower军用电源NH100DM/15/15产品：估价：800，规格：NH100DM/15/15，产品系列编号：齐全

　　

Product Info
270V Input Mil DC-DC Converter 100 Watts Dual Output, 200-400 Vdc Input.
Features
Fully rated for -55C to 100C
0.38 Inch Profile
Fixed Frequency Power Conversion
MIL-STD-883 Screening Available
Remote Turn-On (TTL)
MIL-STD-704D
Synchronization
Input Characteristics	Min	Max	Typical	Units/Comments
Input Voltage Range	200	400		270 VDC, Nominal
Brown Out:		180VDC Min at 75% FL		Vdc
Input Ripple:			200mA TYP.
Efficiency Range:			80% Typical
Output Characteristics	Min	Max	Typical	Units/Comments
Output Power(Max.):		100		Watts
Number of Outputs:		2
Model Main Output Voltage (VDC) Aux 1 Nom. Vout (VDC) Aux 2 Nom. Vout (VDC) Main Output Current (Amps) Aux 1 Output Current (Amps) Aux 2 Output Current (Amps) 2 VDC, Nominal 2 -2 10 -10 3.3 VDC,Nominal 3.3 -3.3 10 -10 5 VDC,Nominal 5 -5 10 -10 5.2 VDC,Nominal 5.2 -5.2 9.8 -9.8 12 VDC,Nominal 12 -12 4.2 -4.2 15 VDC,Nominal 15 -15 3.3 -3.3 24 VDC,Nominal 24 -24 2.1 -2.1 28 VDC,Nominal 28 -28 1.8 -1.8
Trim Range:			90 - 110% Vout
Current limit:			130% Iout TYP.
Overvoltage Protection:			150% TYP. latching
Short Circuit:			Indefinite, Auto Recovery
Minimum Load:			0
Load Regulation:			0.5% Vout MAX
Line Regulation:			0.5% Vout MAX
Ripple/Noise:			100mVpp MAX
Isolation Characteristics
Input to Output:	1000 Vdc min.
Output to Base:	500 Vdc min.
Input to Base:	1000 Vdc min.
Environmental Characteristics
Operating Temperature:	-55 to 100 °C
Storage Temperature:	-55 to 125 °C
Over-Temperature Shut Off:	105 °C
Mechanical Characteristics
Dimensions:	3.0 x 4.0 x 0.38 inches 76.2 x 101.6 x 9.7 mm
Weight:	240 grams
Case Material:	28 Gauge Steel (cold rolled)
Pin Material:	Brass (Solder Plating)
Finish:	Nickel Plating
Mounting:	See data sheet
Connectors:	Pins
Applicable Standards
EMI	Mil-Std 461D with companion filter
Input Transient	Confirms to Mil-Std-704D for transients up to 500 V for 0.1 SEC.