EXC-8000cPCI 多协议板

该板 多支持6个模块，每个模块代表一个独立的测试和仿真设备。大多数模块基于现有的 Excalibur 产品，例如 1553 Px 系列和?ARINC429?RxTx。?

额外的模块正在不断添加。EXC-8000 系列代表了航空电子测试设备灵活性方面的突破，允许通过单板模拟整个测试套件。例如，可以从单个 EXC-8000cPCI 板控制 20 个 ARINC-429 通道、一个 1553 通道和离散 I/O。大多数模块都是基于双端口 RAM 处理器，并为卡提供简单而强大的接口。?

EXC-8000cPCI 附带 C 驱动程序，包括源代码。?

有关可添加到该卡的协议的更多信息，请参阅多协议 8000 模块。

?

订购信息：

?

注：
“xx”表示与载板一起订购的模块（ 多 6 个模块）。
添加到部件号末尾的“-E” 扩展温度（-40° 至 85°C）选项。
添加到部件号末尾的“-001” 保形涂层选项。

The M8KSerial is an enhanced serial interface module for the multiprotocol Excalibur 8000 family of carrier boards, that includes several advanced features such as a high baud rate and high throughput. This module supports up to?two independent channels of serial communications, each of which can be selected as RS-485, RS-422 or RS-232. The module operates independently of the host computer, reducing the need for host intervention.

The M8KSerial?module is based on the Exar XR16M570 Universal Asynchronous Receiver/Transmitter (UART). The device is compatible to industry standard 16550 UARTs. Each of the M4KSerialPlus’s four channels contains a transmit FIFO capable of holding up to 16384 bytes and a receive FIFO capable of holding either 16384 receive bytes or 5460 bytes with a 32-bit Time Tag associated with each byte. These large buffers allow application code to transfer large quantities of data with a single non-blocking subroutine call. The 32-bit Time Tag on receive channels is very useful for synchronizing serial data with data from other modules on the 8000 board or on other interface boards. Each channel has a programmable baud rate of up to 10 Mbps and can be configured as RS-232, RS-422 or RS-485.

The M8KSerial module is supplied with C drivers, including source code.

?

Ordering Information:

?

Note:
"-E" added to the end of the part number specifies extended temperature (-40° to 85°C) option.
"-001" added to the end of the part number specifies conformal coating option.

"-004" added to the end of the part number specifies PCI Express cards only option.