SEHEY西力蓄电池12V200AH NPG200-12太阳能光伏UPS电源EPS直流屏

以下为行业信息，非广告内容，请选择性观看：

SEHEY电池在使用时出现漏电的处理办法

西力蓄电池在使用时如果出现漏电，那么电路中的电流将会达到正常使用时的数百倍。短路时和设备连接的越牢靠，产生的电流就越大，所以所连接在同一电路中的机器将会产生热量，在电路中弱的地方，热量会越来越大，就是把电路中的连接处所熔断，产生短路。SEHEY电池局部可能产生可爆气体(或充电时集存的可爆气体)，在连接处熔断时产生火花，会引起蓄电池爆炸；若蓄电池短路时间较短或电流不是特别大时，可能不会引起连接处熔断现象，但短路仍会有过热现象，会损坏连接条周围的粘结剂，使其留下漏液等隐患。所以，SEHEY电池在使用的过程中，能允许电路中有短路现象的发生，在安装和保养的过程中，一定特别注意，所使用的工具应用绝缘处理，在接线时应该把所需连接的设备先连接好，连接完成后，检查电路的性，然后在进行SEHEY电池之间的连接，在连接时要小心，以防电池互压而出现电池的破裂。

Handling methods for leakage of SEHEY batteries during use

If there is leakage in the Xili battery during use, the current in the circuit will reach hundreds of times that of normal use. The stronger the connection with the device during a short circuit, the greater the current generated. Therefore, machines connected in the same circuit will generate heat. In the weakest part of the circuit, the heat will increase, which is to fuse the connections in the circuit and create a short circuit. SEHEY batteries may produce explosive gases (or explosive gases stored during charging) locally, and sparks may be generated when the connection is blown, which can cause the battery to explode; If the short circuit time of the battery is short or the current is not particularly high, it may not cause the connection to melt, but the short circuit may still cause overheating and damage the adhesive around the connection strip, leaving hidden dangers such as leakage. So, during the use of SEHEY batteries, short circuits in the circuit must not be allowed. During installation and maintenance, special attention must be paid to the insulation treatment of the tools used. When wiring, the equipment to be connected should be connected first. After the connection is completed, the safety of the circuit should be checked, and then the connection between SEHEY batteries should be carried out with caution, To prevent battery rupture due to battery mutual pressure.