商铺名称:上海勇控自动化设备有限公司
联系人:曾双风(先生)
联系手机:
固定电话:
企业邮箱:359869524@qq.com
联系地址:上海市宝山区城银路宝商业园区
邮编:
联系我时,请说是在地方电气网上看到的,谢谢!
BK7150“紧凑型”总线耦合器用于连接 CC-Link 系统与电子端子排,这些端子排可以通过模块化方式扩展。一个节点由一个总线耦合器、1- 64 个任意数量的端子模块以及一个末端端子模块组成。通过 K-bus 扩展技术,最多可以连接 255 个空间分布式总线端子模块到一个总线耦合器中。
总线耦合器自动识别所连接的总线端子模块,建立输入/输出与过程映像字节的联系。第一个输入/输出信号占一个字节(LSB)的第一位,从左边开始,依次排列。总线耦合器将其它信号插入到该字节中。输入和输出区被清晰地区分开来。如果控制器输入或输出的数量超过 8 位,则总线耦合器会自动从下一个新的字节开始。
CC-Link 是一种开放式现场总线系统。可选最大为 10 Mbaud 的波特率,以能够对传输速度进行调整,满足特殊的技术工艺要求。
总线耦合器 BK7150 可连接所有总线端子模块。就用户而言,模拟量输入/输出信号的处理方式与其它种类信号的处理方式没有什么区别。控制器过程映像区内的信息以字节阵列的格式显示。
模拟量总线端子模块和多功能总线端子模块可以通过 KS2000 组态软件进行配置,以与每一个具体应用最佳匹配。根据不同型号,模拟量总线端子模块寄存器中包含有温度范围、增益值和线性化的特性曲线。使用 KS2000 组态软件,可以在 PC 上设置所需参数。总线端子模块可以用故障安全型方式永久存储这些设置。
上电后,控制器自动执行所需配置。
系统参数 | CC-Link | BK7150 | |||||
---|---|---|---|---|---|---|
I/O 站数量 | 64 (每条链路) | |||||
I/O 点数 | 取决于控制器 | |||||
数据传输介质 | 3 芯屏蔽双绞电缆 | |||||
最大电缆长度 |
|
|||||
数据传输速率 |
|
技术参数 | BK7150 |
---|---|
总线端子模块数量 | 64 (通过 K-bus 扩展可达 255) |
现场总线的最大字节数 | 32 byte 输入和 32 byte 输出 |
数字量 I/O 信号 | 112 输入/输出 |
模拟量 I/O 信号 | 16 输入/输出 |
组态方式 | 通过 KS2000 |
数据传输速率 | 156 kbaud…10 Mbaud |
总线接口 | 1 个开放式连接器,5 针 |
电源 | 24 V DC (-15 %/+20 %) |
输入电流 | 70 mA + (总 K-bus 电流)/最大 4, 500 mA |
启动电流 | 2.5 倍持续电流 |
建议保险丝容量 | ≤ 10 A |
K-bus 供电电流 | 1,000 mA |
电源触点 | 最大 24 V DC / 最大 10 A |
电气隔离 | 500 Vrms (电源触点/电源电压/ 现场总线) |
重量 | 约 100 g |
工作/储藏温度 | 0…+55 °C/-25…+85 °C |
相对湿度 | 95 %,无冷凝 |
抗振/抗冲击性能 | 符合 EN 60068-2-6/EN 60068-2-27/29 标准 |
抗电磁干扰/抗电磁辐射性能 | 符合 EN 61000-6-2/EN 61000-6-4 标准 |
防护等级/安装位置 | IP 20/可变 |
BK7000 | Bus Terminal | ControlNet Bus Coupler for up to 64 Bus Terminals |
BK7150 | Bus Terminal | CC-Link “Compact“ Bus Coupler for up to 64 Bus Terminals (255 with K-bus extension) |
BK7300 | Bus Terminal | Modbus Bus Coupler for up to 64 Bus Terminals |
BK7350 | Bus Terminal | Modbus "Compact" Bus Coupler for up to 64 Bus Terminals (255 with K-bus extension) |
BK7500 | Bus Terminal | SERCOS interface Bus Coupler for up to 64 Bus Terminals, 2.4 Mbaud |
BK7520 | Bus Terminal |
SERCOS interface “Economy plus“ Bus Coupler for up to 64 Bus Terminals (255 with K-bus extension) 2, 4, 8, 16 Mbaud |
BK8000 | Bus Terminal | RS485 Bus Coupler for up to 64 Bus Terminals |
BK8100 | Bus Terminal | RS232 Bus Coupler for up to 64 Bus Terminals |
BK9000 | Bus Terminal |
Ethernet TCP/IP Bus Coupler for up to 64 Bus Terminals; Ethernet protocols TwinCAT ADS, Modbus TCP, Beckhoff real-time Ethernet |
BK9050 | Bus Terminal | Ethernet TCP/IP “Compact“ Bus Coupler for up to 64 Bus Terminals (255 with K-bus extension) |
BK9053 | Bus Terminal | PROFINET “Compact” Bus Coupler for up to 64 Bus Terminals (255 with K-bus extension) |
BK9055 | Bus Terminal | EtherNet/IP “Compact“ Bus Coupler for up to 64 Bus Terminals (255 with K-bus extension) |
BK9100 | Bus Terminal |
Ethernet TCP/IP Bus Coupler for up to 64 Bus Terminals (with integrated 2-channel switch); Ethernet protocols TwinCAT ADS, Modbus TCP, Beckhoff real-time Ethernet |
BK9103 | Bus Terminal | PROFINET Bus Coupler for up to 64 Bus Terminals (with integrated 2-channel switch) |
BK9105 | Bus Terminal | EtherNet/IP Bus Coupler for up to 64 Bus Terminals (with integrated 2-channel switch) |
BK9500 | Bus Terminal | USB Bus Coupler for up to 64 Bus Terminals |
BC3100 | Bus Terminal |
Bus Terminal Controller with integrated IEC 61131-3 PLC, 32 kbytes program memory, PROFIBUS interface, 12 Mbaud |
BC3150 | Bus Terminal |
“Compact“ Bus Terminal Controller with integrated IEC 61131-3 PLC, 48 kbytes program memory, PROFIBUS interface, 12 Mbaud |
BC5150 | Bus Terminal |
“Compact“ Bus Terminal Controller with integrated IEC 61131-3 PLC, 48 kbytes program memory, CANopen interface, 1 Mbaud |
BC5250 | Bus Terminal |
“Compact“ Bus Terminal Controller with integrated IEC 61131-3 PLC, 48 kbytes program memory, DeviceNet interface, 500 kbaud |