商铺名称：上海勇控自动化设备有限公司
联系人：曾双风（先生）
联系手机：
固定电话：
企业邮箱：359869524@qq.com
联系地址：上海市宝山区城银路宝商业园区
邮编：
联系我时，请说是在地方电气网上看到的，谢谢！
EK1521 | 单端口 EtherCAT 光纤分支耦合器BECKHOFF倍福ek1520耦合器ek1521 全新现货端子模块
In conjunction with an EK1100 EtherCAT Coupler, the EK1521 1-port EtherCAT fibre optic junction enables conversion from 100BASE-TX to 100BASE-FX physics (glass fibre). Distances of up to 2 km can be bridged with the EK1521 and the EK1501 EtherCAT Coupler for multimode fibre optics. Even cable redundant systems with fibre optic can be realised using the 1-port EtherCAT fibre optic junction. The run LED shows the status of the EK1521.
若与 EtherCAT 耦合器 EK1100 配套使用，单端口 EtherCAT 光纤分支耦合器 EK1521 可以将 100BASE-TX 物理层转换成 100BASE-FX 物理层（玻璃光纤）。如果最大距离达到 2 千米，可通过用于多模光纤的 EK1521 和 EK1501 系列 EtherCAT 耦合器进行桥接。用于单模光纤的 EK1521-0010 和 EK1501-0010 允许的最大距离为 20 千米。采用单端口 EtherCAT 光纤分支耦合器甚至还可以实现带光纤的电缆冗余系统。端子模块上的 LED 显示 EK1521 的工作状态。
In conjunction with an EK1100 EtherCAT Coupler, the EK1521 1-port EtherCAT fibre optic junction enables conversion from 100BASE-TX to 100BASE-FX physics (glass fibre). Distances of up to 2 km can be bridged with the EK1521 and the EK1501 EtherCAT Coupler for multimode fibre optics. Even cable redundant systems with fibre optic can be realised using the 1-port EtherCAT fibre optic junction. The run LED shows the status of the EK1521.BECKHOFF倍福ek1520耦合器ek1521 全新现货端子模块
| Technical data | EK1521 |
|---|---|
| Task within EtherCAT system | coupling of EtherCAT junctions via multimode glass fibre |
| Data transfer medium | multimode glass fibre 50/125 μm (MM) |
| Distance between stations | max. 2000 m (100BASE-FX) |
| Number of EtherCAT Terminals | – |
| Type/number of peripheral signals | – |
| Protocol | EtherCAT |
| Delay | approx. 1 μs |
| Data transfer rates | 100 Mbaud |
| Configuration | not required |
| Bus interface | 1 x SC Duplex |
| Power supply | from E-bus |
| Current consumption E-bus | typ. 350 mA |
| Current consumption 24 V DC | – |
| Weight | approx. 65 g |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos. | IP 20/variable |
| Approvals | CE, UL, Ex |
| Further fibre optic products | |
|---|---|
| EK1521-0010 | 1-port EtherCAT singlemode fibre optic junction, distance between stations up to 20 km |
| EK1501 | EtherCAT Coupler with ID switch, multimode fibre optic for E-bus terminals (ELxxxx) |
| EK1501-0010 | EtherCAT Coupler with ID switch, singlemode fibre optic for E-bus terminals (ELxxxx), distance between stations up to 20 km |
| EK1501-0100 | EtherCAT Coupler, media converter (multimode fibre optic to RJ45) with ID switch |
| CU1521 | EtherCAT media converter fibre optic, IP20 |
| EP9521 | EtherCAT/Industrial Ethernet module EP9521 for Industrial Fast Ethernet/100 Mbaud |
与 E 总线末端端子一样， EK1110 EtherCAT 扩展端子与 EtherCAT 端子块的末端相连。 该端子可以将以太网电缆与 RJ 45 接头相连，因此可将 EtherCAT 电缆束的电气隔离长度增 在 E EK1110 加最多100 m。 EK1110 端子中， 总线信号被动态转换为 100baseTX 以太网信号。 电路的电源通过 E 总线提供。无需执行参数化或组态任务。
10
技术数据
技术数据
EK1110
将 E 总 线 信 号 转 换 为 100baseTX 以 太 网 信 号 以 扩 展 EtherCAT 网络 Ethernet CAT 5 电缆 100 m (100baseTX) 任何 EtherCAT 协议 大约 1 μs 100 Mbit/s 不需要 1 个 RJ 45 接口 总线提供 大约 150 mA 500 Vrms（供电电压/以太网）
在 EtherCAT 系统中的任务 数据传输介质 模块之间的距离 协议 延迟 传输速率 配置 总线连接 电源 E E 总线供电电流 电气隔离
| 技术参数 | EK1521 | EK1521-0010 |
|---|---|---|
| EtherCAT 系统内的任务 | 通过多模玻璃纤维连接 EtherCAT 分支耦合器 | 通过单模玻璃纤维连接 EtherCAT 分支耦合器 |
| 数据传输介质 | 多模玻璃光纤 50/125 μm（MM） | 单模玻璃光纤 9/125 μm（SM） |
| 站点之间的距离 | 最长 2 千米（100BASE-TX） | 最长 20 千米（100BASE-TX） |
| EtherCAT 端子模块数量 | – | |
| 外设信号类型/数量 | – | |
| 协议 | EtherCAT | |
| 延迟 | 约 1 μs | |
| 数据传输率 | 100 Mbaud | |
| 组态 | 无需配置 | |
| 总线接口 | 1 x SC 全双工 | |
| 电源 | 由 E-bus 供电 | |
| E-bus 电流消耗 | 通常为 350 mA | |
| 24 V DC 电流消耗 | – | |
| 重量 | 约 65 g | |
| 工作/储藏温度 | -25…+60 °C/-40…+85 °C | |
| 相对湿度 | 95 %，无冷凝 | |
| 抗振/抗冲击性能 | 符合 EN 60068-2-6/EN 60068-2-27 标准 | |
| 抗电磁干扰/抗电磁辐射性能 | 符合 EN 61000-6-2/EN 61000-6-4 标准 | |
| 防护等级/安装位置 | IP 20/可变 | |
| 认证 | CE，UL，Ex | |
BECKHOFF倍福ek1520耦合器ek1521 全新现货端子模块
| EK1521 | EtherCAT Terminals | 1-port EtherCAT multi-mode fibre optic junction |
| EK1521-0010 | EtherCAT Terminals | 1-port EtherCAT singlemode fibre optic junction, distance between stations up to 20 km |
| EK1541 | EtherCAT Terminals | EtherCAT Coupler with ID switch, plastic optical fibre for E-bus terminals (ELxxxx) |
| EK1561 | EtherCAT Terminals | 1-port EtherCAT plastic optical fibre junction |
| EK1110 | EtherCAT Terminals | EtherCAT extension |
| EK1814 | EtherCAT Terminals |
EtherCAT Coupler for E-bus terminals (ELxxxx) with integrated digital I/Os: – 4 digital inputs 24 V DC, filter 3.0 ms, type 3 – 4 digital outputs 24 V DC, 0.5 A, 1-wire system |
| ek1818 | EtherCAT Terminals |
EtherCAT Coupler for E-bus terminals (ELxxxx) with integrated digital I/Os: – 8 digital inputs 24 V DC, filter 3.0 ms, type 3 – 4 digital outputs 24 V DC, 0.5 A, 1-wire system |
| EK1828 | EtherCAT Terminals |
EtherCAT Coupler for E-bus terminals (ELxxxx) with integrated digital I/Os: – 4 digital inputs 24 V DC, filter 3.0 ms, type 3 – 8 digital outputs 24 V DC, 0.5 A, 1-wire system |
| EK1828-0010 | EtherCAT Terminals |
EtherCAT Coupler for E-bus terminals (ELxxxx) with integrated digital I/Os: – 8 digital outputs 24 V DC, 0.5 A, 1-wire system |
| EK1914 | EtherCAT Terminals |
EtherCAT Coupler for E-bus terminals (ELxxxx) with integrated digital standard and safety I/Os: – 6 digital inputs, 2 of which are fail-safe inputs, 24 V DC, filter 3.0 ms, type 3 – 6 digital outputs, 2 of which are fail-safe outputs, 24 V DC, 0.5 A, 1-wire system |
| EK3100 | EtherCAT Terminals | PROFIBUS Bus Coupler for EtherCAT Terminals (ELxxxx) |
| EK5100 | EtherCAT Terminals | CANopen Bus Coupler for EtherCAT Terminals (ELxxxx) |
| EK5200 | EtherCAT Terminals | DeviceNet Bus Coupler for EtherCAT Terminals (ELxxxx) |
| EK9000 | EtherCAT Terminals | Ethernet Bus Coupler for EtherCAT Terminals (ELxxxx) |
| EK9300 | EtherCAT Terminals | PROFINET RT Bus Coupler for EtherCAT Terminals (ELxxxx) |
| EK9500 | EtherCAT Terminals | EtherNet/IP Bus Coupler for EtherCAT Terminals (ELxxxx) |
| EK9700 | EtherCAT Terminals | SERCOS III Bus Coupler for EtherCAT Terminals (ELxxxx) |
| EK1960 | EtherCAT Terminals |
TwinSAFE Compact Controller for EtherCAT Terminals (ELxxxx) with integrated I/Os: – 20 safe digital inputs 24 V DC – 8 safe digital outputs 24 V DC, 0.5 A, 1-wire system – 2 safe digital outputs, potential-free make contacts |
| EL1002 | EtherCAT Terminals | 2-channel digital input terminal 24 V DC, filter 3.0 ms, 4-wire system |
