上海西门子开关量输出模板6ES7 132-4BD02-0AA0-地方电气网供应信息-地方电气网

商品详情

6ES7132-4BD02-0AA0

SIMATIC DP，5 个电子模块用于 ET 200S，4 个标准数字输出 24V/0.5A DC，15mm 结构宽度 5 件/包装单位

数量单元： 5

6AG1132-4BD02-7AA0

SIPLUS ET 200S EM 4DO 标准型 -25...+70°C 带防腐蚀涂层基于 6ES7132-4BD02-0AA0 。电子模块 24V DC/0.5A 15mm 结构宽度 5 件/包装单位

数量单元： 5

用于 ET 200S 的 2、4 和 8 通道输入和输出
采用自动编码，可插入到 TM-E 端子模板
高性能型，用于增强设备可用性、附加功能和丰富的诊断功能
可以进行模板的热交换

技术规范

Article number	6ES7131-4BB01-0AA0	6ES7131-4BB01-0AB0	6ES7131-4BD01-0AA0	6ES7131-4BD01-0AB0	6ES7131-4BD51-0AA0	6ES7131-4BF00-0AA0
	ET200S, EL-MOD., 2DI ST, DC 24V, 5PCS.	ET200S, EL-MOD., 2DI HF, DC 24V, 5PCS.	ET200S, EL-MOD., 4DI ST., DC 24V, 5PCS.	ET200S, EL-MOD., 4DI HF, DC 24V, 5PC.	ET200S, EL-MOD., 4DI HF, DC 24V, 5PCS.	ET200S, ELEKTRONIKMODULE, 8DI DC 24V
Supply voltage
Rated value (DC)
● 24 V DC	Yes; From power module	Yes; From power module	Yes; From power module	Yes; From power module	Yes; From power module	Yes
Reverse polarity protection	Yes	Yes	Yes	Yes	Yes	Yes
Input current
from supply voltage L+, max.	Dependent on encoder	Dependent on encoder	Dependent on encoder	Dependent on encoder	Dependent on encoder	Dependent on encoder
from backplane bus 3.3 V DC, max.	10 mA	10 mA	10 mA	10 mA		10 mA
Encoder supply
Number of outputs						0; no encoder supply
Type of output voltage	min. L+ (-0.5 V), under load	min. L+ (-0.5 V), under load	min. L+ (-0.5 V), under load	min. L+ (-0.5 V), under load	max. M +0.5 V, under load
Short-circuit protection		Yes; Electronic		Yes; Electronic
Output current
● Rated value	500 mA	500 mA	500 mA	500 mA	500 mA
● permissible range, lower limit	0 mA	0 mA	0 mA	0 mA	0 mA
● permissible range, upper limit	500 mA	500 mA	500 mA	500 mA	500 mA
Power loss
Power loss, typ.	0.4 W	0.4 W	0.7 W	0.7 W	0.7 W	1.2 W
Address space per module
● with packing	2 bit	2 bit	4 bit	4 bit	4 bit
● without packing	1 byte	1 byte	1 byte	1 byte	1 byte	1 byte
Digital inputs
Number of digital inputs	2	2	4	4	4	8
Input characteristic curve in accordance with IEC 61131, type 1	Yes	Yes	Yes	Yes	Yes	Yes; 2-wire sensors connectable
Number of simultaneously controllable inputs
● Number of simultaneously controllable inputs						8
Input voltage
● Type of input voltage	DC	DC	DC	DC	DC	DC
● Rated value (DC)	24 V	24 V	24 V	24 V	24 V	24 V
● for signal "0"	-30 to +5V	-30 to +5V	-30 to +5V	-30 to +5V	-5 to +30V	-30 to +5V
● for signal "1"	+15 to +30V	+11 to +30V	+15 to +30V	+11 to +30V	-15 to -30 V	+15 to +30V
Input current
● for signal "1", typ.	7 mA; at 24 V	8 mA	7 mA; at 24 V	8 mA	7 mA; at 24 V	5 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable	No	Yes; 0.1 / 0.5 / 3 / 15 ms	No	Yes; 0.1 / 0.5 / 3 / 15 ms	No	No
— at "0" to "1", min.	2 ms; typically 3 ms	0.05 / 0.4 / 2.7 / 14.85	2 ms; typically 3 ms	0.05 / 0.4 / 2.7 / 14.85	2 ms; typically 3 ms	2 ms
— at "0" to "1", max.	4.5 ms	0,15 / 0,6 / 3,3 / 15,15	4.5 ms	0,15 / 0,6 / 3,3 / 15,15	4.5 ms	4.5 ms
— at "1" to "0", min.	2 ms; typically 3 ms	0.05 / 0.4 / 2.7 / 14.85	2 ms; typically 3 ms	0.05 / 0.4 / 2.7 / 14.85	2 ms; typically 3 ms	2 ms
— at "1" to "0", max.	4.5 ms	0,15 / 0,6 / 3,3 / 15,15	4.5 ms	0,15 / 0,6 / 3,3 / 15,15	4.5 ms	4.5 ms
Cable length
● shielded, max.	1 000 m	1 000 m	1 000 m	1 000 m	1 000 m	1 000 m
● unshielded, max.	600 m	600 m	600 m	600 m	600 m	600 m
Encoder
Connectable encoders
● 2-wire sensor	Yes	Yes	Yes	Yes	Yes	Yes
— permissible quiescent current (2-wire sensor), max.	1.5 mA	1.5 mA	1.5 mA	1.5 mA	1.5 mA	1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)						Yes; TWE = 3000 us
Interrupts/diagnostics/status information
Diagnostic functions	No	Yes	No	Yes	No	No
Alarms
● Hardware interrupt		Yes; Parameterizable
Diagnostic messages
● Short-circuit		Yes; Short-circuit of outputs to ground; module by module		Yes; Short-circuit of outputs to ground; module by module
Diagnostics indication LED
● Group error SF (red)	No	Yes	No	Yes	No
● Status indicator digital input (green)	Yes; per channel	Yes; per channel	Yes; per channel	Yes; per channel	Yes; per channel	Yes
Parameter
Remark	1 byte	3 byte	1 byte	3 byte	1 byte	3-byte parameter (not accessible for the user)
Diagnostics short-circuit		Disable / enable		Disable / enable
Potential separation
Potential separation digital inputs
● between the channels	No	No	No	No	No	No
● between the channels and backplane bus	Yes	Yes	Yes	Yes	Yes	Yes
Permissible potential difference
between different circuits	75 V DC/60 V AC	75 V DC/60 V AC	75 V DC/60 V AC	75 V DC/60 V AC	75 V DC/60 V AC	75 V DC/60 V AC
Isolation
Isolation tested with	500 V DC	500 V DC	500 V DC	500 V DC	500 V DC	500 V DC
Dimensions
Width	15 mm	15 mm	15 mm	15 mm	15 mm	15 mm
Height	81 mm	81 mm	81 mm	81 mm	81 mm	81 mm
Depth	52 mm	52 mm	52 mm	52 mm	52 mm	52 mm
Weights
Weight, approx.	35 g	35 g	35 g	35 g	35 g	35 g

Article number	6ES7131-4CD02-0AB0	6ES7131-4EB00-0AB0	6ES7131-4FB00-0AB0	6ES7131-4RD02-0AB0	6ES7131-4BF50-0AA0
	ET200S, EL-MOD., 4DI, UC 24-48V, 5 PCS	ET200S, EL-MOD., 2DI, AC 120V, 5PCS.	ET200S, EL-MOD., 2DI, AC 230V, 5PCS.	ET200S, EL-MOD., 4DI DC 24V NAMUR	ET 200S, 8 DI Source Input DC24V
Supply voltage
Rated value (DC)
● 24 V DC	Yes; From power module			Yes	Yes; From power module
Rated value (AC)
● 24 V AC	Yes
● 120 V AC		Yes; From power module
● 230 V AC			Yes
Reverse polarity protection	Yes; AC or DC automatic				Yes
Input current
from supply voltage L+, max.	Dependent on encoder				Dependent on encoder
from supply voltage L1, max.		Dependent on encoder	Dependent on encoder
from backplane bus 3.3 V DC, max.	10 mA	6 mA	6 mA
Encoder supply
Number of outputs				1
Type of output voltage	min. L+ (-0.5 V), under load			min. 8.2 V, loaded
Short-circuit protection	Yes; per module			Yes; Electronic
Output current
● Rated value	500 mA			45 mA
● permissible range, lower limit	0 mA
● permissible range, upper limit	500 mA
Power loss
Power loss, typ.	0.7 W	0.5 W	0.7 W	1.6 W	1.2 W
Address space per module
● with packing	4 bit	2 bit	2 bit	4 bit
● without packing	1 byte	1 byte	1 byte	1 byte
Digital inputs
Number of digital inputs	4	2	2	4	8
Number of NAMUR inputs				4
Parallel switching of inputs				No
Input characteristic curve in accordance with IEC 61131, type 1	Yes	Yes	Yes		Yes
Number of simultaneously controllable inputs
● Number of simultaneously controllable inputs				4
Input voltage
● Type of input voltage	AC/DC	AC	AC	DC	DC
● Rated value (DC)					24 V
● Rated value (AC)		120 V; 47 ... 63 Hz	230 V; 47 ... 63 Hz
● Rated value (UC)	24 V; 24 ... 48 V UC (47 ... 63 Hz)
● for signal "0"	-6 to +6 V DC/ 0 to 5 V AC	0V AC to 20V AC	0V AC to 40V AC		-5 to +30V
● for signal "1"	-15 V DC to -57.6 V DC; 15 V DC to 57.6 V DC; 15 V AC to 48 V AC	79 to 132 V AC	164V AC to 264V AC		-15 to -30 V
Input current
● for signal "1", typ.	10 mA; 4 to 10 mA	3 mA; 3 to 9 mA	5 mA; 5 to 15mA		6 mA; at 24 V
for 10 k switched contact
— for signal "0"				0.35 to 1.2 mA
— for signal "1"				2.1 to 7 mA
for unswitched contact
— for signal "0", max. (permissible quiescent current)				0.5 mA
— for signal "1"				typ. 8 mA
for NAMUR encoders
— for signal "0"				0.35 to 1.2 mA
— for signal "1"				2.1 to 7 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable					No
— at "0" to "1", min.		15 ms	15 ms		2 ms
— at "0" to "1", max.	15 ms			4.6 μs	4.5 ms
— at "1" to "0", min.		25 ms	45 ms		2 ms
— at "1" to "0", max.	15 ms			4.6 μs	4.5 ms
Encoder connection
● Fixed current limitation for wire-break monitoring, min.	18 k?; Rated voltage 24 V (15 V to 35 V); rated voltage 48 V (30 V to 60 V): 39 kohms
Cable length
● shielded, max.	1 000 m	1 000 m	1 000 m	200 m	1 000 m
● unshielded, max.	600 m	600 m	600 m		600 m
Encoder
Connectable encoders
● 2-wire sensor	Yes	No	No		Yes
— permissible quiescent current (2-wire sensor), max.	2 mA; (0.5 to 2 mA), a minimum load current is necessary for wire break diagnostics.	1 mA	2 mA		1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	No	No		Yes
Interrupts/diagnostics/status information
Diagnostic functions	Yes; Parameterizable	No	No	Yes; Diagnostic alarm	No
Alarms
● Diagnostic alarm				Yes; can be set
● Hardware interrupt				No
Diagnostic messages
● Diagnostic information readable				Yes
● Wire-break	Yes			Yes
● Short-circuit		No	No
Diagnostics indication LED
● Group error SF (red)	Yes			Yes	No
● Status indicator digital input (green)	Yes; per channel	Yes; per channel	Yes; per channel	Yes; per channel	Yes; per channel
Parameter
Remark		3 byte	3 byte	12 byte	3 byte
Potential separation
Potential separation digital inputs
● between the channels	No	No	No	No	No
● between the channels and backplane bus	Yes	Yes	Yes	Yes	Yes
● Between the channels and load voltage L+				Yes
Permissible potential difference
between different circuits	75 V DC/60 V AC			75 V DC/60 V AC	75 V DC/60 V AC
between M internally and the inputs		1500 V AC	1500 V AC
Isolation
Isolation tested with	2500 V DC	2500 V DC	4 000 V DC	500 V DC	500 V DC
Dimensions
Width	15 mm	15 mm	15 mm	15 mm	15 mm
Height	81 mm	81 mm	81 mm	81 mm	81 mm
Depth	52 mm	52 mm	52 mm	52 mm	52 mm
Weights
Weight, approx.	35 g	31 g	31 g	35 g	35 g

Article number	6ES7132-4BB01-0AB0	6ES7132-4BB01-0AA0	6ES7132-4BB31-0AB0	6ES7132-4BB31-0AA0	6ES7132-4BD00-0AB0	6ES7132-4BD02-0AA0
	ET200S, EL-MOD., 2DO HF,DC24V, 0.5A, 5PC	ET200S, EL-MOD., 2DO ST,DC24V, 0.5A, 5PC	ET200S, EL-MOD., 2DO HF, DC 24V, 2A, 5PC	ET200S, EL-MOD., 2DO ST, DC 24V, 2A, 5PC	ET200S, EL-MOD., 4DO HF,DC24V, 0.5A,5PCS	ET200S, EL-MOD., 4DO ST,DC24V, 0.5A,5PCS
Supply voltage
Reverse voltage protection	Yes; when using the same load voltage as on the power module	Yes; when using the same load voltage as on the power module	Yes; when using the same load voltage as on the power module	Yes; when using the same load voltage as on the power module	Yes; when using the same load voltage as on the power module	Yes; when using the same load voltage as on the power module
Load voltage L+
● Rated value (DC)	24 V; From power module	24 V; From power module	24 V; From power module	24 V; From power module	24 V; From power module	24 V; From power module
● Reverse polarity protection	Yes; polarity reversal can lead to the digital outputs being connected through	Yes; polarity reversal can lead to the digital outputs being connected through	Yes; polarity reversal can lead to the digital outputs being connected through	Yes; polarity reversal can lead to the digital outputs being connected through	Yes; polarity reversal can lead to the digital outputs being connected through	Yes; polarity reversal can lead to the digital outputs being connected through
Input current
from load voltage L+ (without load), max.	5 mA; Per channel	5 mA; Per channel	5 mA; Per channel	5 mA; Per channel	5 mA; Per channel	10 mA; Per channel
from backplane bus 3.3 V DC, max.	10 mA	10 mA	10 mA	10 mA	10 mA	10 mA
Power loss
Power loss, typ.	0.4 W	0.4 W	1.4 W	1.4 W	0.8 W	0.8 W
Address area
Address space per module
● with packing	2 bit	2 bit	2 bit	2 bit	4 bit	4 bit
● without packing	1 byte	1 byte	1 byte	1 byte	1 byte	1 byte
Digital outputs
Number of digital outputs	2	2	2	2	4	4
Short-circuit protection	Yes	Yes	Yes	Yes	Yes	Yes
● Response threshold, typ.	1.5 A	0.7 to 1.8 A	4 A	2.8 to 7.2 A	0.7 to 1.5 A	1 to 1.5 A
Limitation of inductive shutdown voltage to	-55 to -60 V, typ. L+( )	-55 to -60 V, typ. L+( )	-55 to -60 V, typ. L+( )	-55 to -60 V, typ. L+( )	-55 to -60 V, L+( )	L+ (-55 to -60 V)
Controlling a digital input	Yes	Yes	Yes	Yes	Yes	Yes
Switching capacity of the outputs
● on lamp load, max.	2.5 W	5 W	5 W	10 W	5 W	5 W
Load resistance range
● lower limit	48 ?	48 ?	12 ?	12 ?	48 ?	48 ?
● upper limit	3 400 ?	3 400 ?	3 400 ?	3 400 ?	3 400 ?	3 400 ?
Output voltage
● for signal "1", min.	L+ (-1 V)	L+ (-1 V)	L+ (-1 V)	L+ (-1 V)	L+ (-1 V)	L+ (-1 V)
Output current
● for signal "1" rated value	0.5 A	0.5 A	2 A	2 A	0.5 A	0.5 A
● for signal "1" permissible range, min.	7 mA	7 mA	7 mA	7 mA	7 mA	7 mA
● for signal "1" permissible range, max.	600 mA	600 mA	2.4 A	2.4 A	600 mA	600 mA
● for signal "0" residual current, max.	0.3 mA	0.3 mA	0.5 mA	0.5 mA	0.3 mA	0.3 mA
Output delay with resistive load
● "0" to "1", max.	100 μs	200 μs	100 μs	200 μs	100 μs	50 μs
● "1" to "0", max.	400 μs	1.3 ms	400 μs	1.3 ms	300 μs	120 μs
Parallel switching of two outputs
● for uprating	No	No	No	No	No	No
● for redundant control of a load	Yes; per module	Yes; per module	Yes; per module	Yes; per module	Yes; per module	Yes; per module
Switching frequency
● with resistive load, max.	100 Hz	100 Hz	100 Hz	100 Hz	100 Hz	800 Hz
● with inductive load, max.	2 Hz	2 Hz	2 Hz; 0,5 H	2 Hz; 0,5 H	2 Hz	2 Hz
● on lamp load, max.	10 Hz	10 Hz	10 Hz	10 Hz	10 Hz	10 Hz
Total current of the outputs
● Current per module, max.	1 A	1 A	4 A	4 A	2 A	2 A
Cable length
● shielded, max.	1 000 m	1 000 m	1 000 m	1 000 m	1 000 m	1 000 m
● unshielded, max.	600 m	600 m	600 m	600 m	600 m	600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	No	Yes	No	Yes	Yes
Interrupts/diagnostics/status information
Diagnostic functions	Yes	No	Yes	No	Yes	No
Substitute values connectable	Yes; 0/1		Yes; 0/1
Diagnostic messages
● Diagnostic information readable	Yes		Yes
● Wire-break	Yes; channel by channel		Yes; channel by channel
● Short-circuit	Yes; channel by channel		Yes; channel by channel		Yes; Module-wise
Diagnostics indication LED
● Group error SF (red)	Yes		Yes		Yes
● Status indicator digital output (green)	Yes	Yes	Yes	Yes	Yes; Per channel	Yes
Parameter
Remark	3 byte	1 byte	3 byte	1 byte	3 byte	1 byte
Diagnostics wire break	Disable / enable		Disable / enable
Diagnostics short-circuit	Disable / enable		Disable / enable
Response to CPU/master STOP	Substitute a value/keep last value		Substitute a value/keep last value
Potential separation
Potential separation digital outputs
● between the channels	No	No	No	No	No	No
● between the channels and backplane bus	Yes	Yes	Yes	Yes	Yes	Yes
Isolation
Isolation tested with	500 V DC	500 V DC	500 V DC	500 V DC	500 V DC	500 V DC
Dimensions
Width	15 mm	15 mm	15 mm	15 mm	15 mm	15 mm
Height	81 mm	81 mm	81 mm	81 mm	81 mm	81 mm
Depth	52 mm	52 mm	52 mm	52 mm	52 mm	52 mm
Weights
Weight, approx.	40 g	40 g	40 g	40 g	40 g	40 g

Article number	6ES7132-4BF00-0AB0	6ES7132-4BF00-0AA0
	ET200S, ELECTR.MODULE 8DO HF DC24V/0,5A	ET200S, ELEKTRONIKMODULE 8DO DC24V/0,5A
Supply voltage
Reverse voltage protection	Yes; when using the same load voltage as on the power module	Yes
Load voltage L+
● Rated value (DC)	24 V; From power module	24 V
● Reverse polarity protection	Yes; polarity reversal can lead to the digital outputs being connected through	Yes
Input current
from load voltage L+ (without load), max.	5 mA; Per channel	5 mA; Per channel
from backplane bus 3.3 V DC, max.	10 mA	10 mA
Power loss
Power loss, typ.	1.5 W	1.5 W
Address area
Address space per module
● without packing	1 byte	1 byte
Digital outputs
Number of digital outputs	8	8
Short-circuit protection	Yes	Yes
● Response threshold, typ.	0.7 to 1.9 A	1.5 A
Limitation of inductive shutdown voltage to	L+ -(47 to 60 V)	Typ. L+ (-55 to -60 V)
Controlling a digital input	Yes	Yes
Switching capacity of the outputs
● on lamp load, max.	5 W	5 W
Load resistance range
● lower limit	48 ?	48 ?
● upper limit	3 400 ?	3 400 ?
Output voltage
● for signal "1", min.	L+ (-1.0 V)	L+ (-1.0 V)
Output current
● for signal "1" rated value	0.5 A	0.5 A
● for signal "1" permissible range, min.	7 mA	7 mA
● for signal "1" permissible range, max.	600 mA	600 mA
● for signal "0" residual current, max.	0.3 mA	0.3 mA
Output delay with resistive load
● "0" to "1", max.	300 μs	300 μs
● "1" to "0", max.	600 μs	600 μs
Parallel switching of two outputs
● for uprating	No	No
● for redundant control of a load	Yes; per module	Yes
Switching frequency
● with resistive load, max.	100 Hz	100 Hz
● with inductive load, max.	2 Hz	2 Hz
● on lamp load, max.	10 Hz	10 Hz
Total current of the outputs
● Current per module, max.	4 A	4 A
Cable length
● shielded, max.	1 000 m	1 000 m
● unshielded, max.	600 m	600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	Yes; jitter incumbered < 100us
Interrupts/diagnostics/status information
Diagnostic functions	Yes	No
Diagnostic messages
● Diagnostic information readable	Yes
● Short-circuit	Yes; Module-wise
Diagnostics indication LED
● Group error SF (red)	Yes
● Status indicator digital output (green)	Yes; Per channel	Yes
Parameter
Remark	1 byte	3-byte parameter (not accessible for the user)
Potential separation
Potential separation digital outputs
● between the channels	No	No
● between the channels and backplane bus	Yes	Yes
Isolation
Isolation tested with	500 V DC	500 V DC
Dimensions
Width	15 mm	15 mm
Height	81 mm	81 mm
Depth	52 mm	52 mm
Weights
Weight, approx.	40 g	40 g

Article number	6ES7132-4BD30-0AB0	6ES7132-4BD32-0AA0	6ES7132-4FB01-0AB0	6ES7132-4HB01-0AB0	6ES7132-4HB12-0AB0
	ET200S, EL-MOD., 4DO HF, DC24V, 2A, 5PCS	ET200S, EL-MOD., 4DO ST, DC24V, 2A, 5PCS	ET200S, ELECT. MOD., 2DO, AC 230V, 5PCS	ET200S, EL-MOD., 2RO. DC24VAC230V,5A,5PC	ET200S, EL-MOD., 2RO,DC48V/AC230V,5A,5PC
Supply voltage
Reverse voltage protection	Yes; when using the same load voltage as on the power module	Yes; when using the same load voltage as on the power module	Yes; when using the same load voltage as on the power module
Load voltage L+
● Rated value (DC)	24 V; From power module	24 V; From power module		24 V; From power module	24 V; From power module
● Reverse polarity protection	Yes; polarity reversal can lead to the digital outputs being connected through	Yes		Yes	Yes
Load voltage L1
● permissible range, lower limit (AC)			24 V; From power module
● permissible range, upper limit (AC)			230 V
● permissible frequency range, lower limit			47 Hz
● permissible frequency range, upper limit			63 Hz
Input current
from load voltage L+ (without load), max.	5 mA; Per channel	10 mA; Per channel		30 mA	30 mA
from load voltage L1 (without load), max.			15 mA; Per channel
from backplane bus 3.3 V DC, max.	10 mA	10 mA	18 mA	10 mA	10 mA
Power loss
Power loss, typ.	1.6 W	1.6 W		0.6 W	0.6 W
Power loss, max.			4 W
Address area
Address space per module
● with packing	4 bit	4 bit	2 bit	2 bit	2 bit
● without packing	1 byte	1 byte	1 byte	1 byte	1 byte
Digital outputs
Number of digital outputs	4	4	2	2	2
Short-circuit protection	Yes	Yes	Yes	No	No
● Response threshold, typ.	5 to 10 A	2.8 to 7.2 A
Limitation of inductive shutdown voltage to	L+ -(37 to 41V)	Typ. L+ (-55 to -60 V)	-55 to -60 V	No	No
Controlling a digital input	Yes	Yes	Yes; possible	Yes	Yes
Switching capacity of the outputs
● on lamp load, max.		10 W	100 W
Load resistance range
● lower limit	12 ?	12 ?
● upper limit	3 400 ?	3 400 ?
Output voltage
● for signal "1", min.	L+ (-1.0 V)	L+ (-1.0 V)	L+ (-1.5 V)
Output current
● for signal "1" rated value	2 A	2 A	2 A	5 A	5 A
● for signal "1" permissible range, min.	7 mA	7 mA	0.1 mA
● for signal "1" permissible range, max.	2.4 A	2.4 A	2.2 A
● for signal "1" minimum load current				8 mA	8 mA
● for signal "0" residual current, max.	0.5 mA	0.1 mA	3 mA
Output delay with resistive load
● "0" to "1", max.	250 μs	50 μs; Typ. 45 μs	15 ms
● "1" to "0", max.	400 μs	120 μs; Typ. 90 μs	15 ms
Parallel switching of two outputs
● for uprating	No	No	No
● for redundant control of a load	Yes; per module	Yes; per module	Yes; per module
Switching frequency
● with resistive load, max.	100 Hz	1 000 Hz	10 Hz	2 Hz	2 Hz
● with inductive load, max.	2 Hz	2 Hz; At 0.5 H	0.5 Hz	0.5 Hz	0.5 Hz
● on lamp load, max.	10 Hz	10 Hz	1 Hz	2 Hz	2 Hz
Total current of the outputs
● Current per module, max.	4 A	4 A	2 A; Note derating data in the manual
Relay outputs
Switching capacity of contacts
— Thermal continuous current, max.				5 A	5 A
Cable length
● shielded, max.	1 000 m	1 000 m	1 000 m	1 000 m	1 000 m
● unshielded, max.	600 m	600 m	600 m	600 m	600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	Yes		No	No
Interrupts/diagnostics/status information
Diagnostic functions	Yes	No	No	No	No
Substitute values connectable				Yes; 0/1	Yes; 0/1
Diagnostic messages
● Short-circuit	Yes; Module-wise
Diagnostics indication LED
● Group error SF (red)	Yes; SF-LED (red)
● Status indicator digital output (green)	Yes; Per channel	Yes	Yes	Yes	Yes
Parameter
Remark		1 byte	3 byte
Response to CPU/master STOP			Substitute a value/keep last value, 0/1	Substitute a value/keep last value	Substitute a value/keep last value
Potential separation
Potential separation digital outputs
● between the channels	No	No	No	Yes	Yes
● between the channels and backplane bus	Yes	Yes	Yes	Yes	Yes
● Between the channels and load voltage L+				Yes	Yes
Isolation
Isolation tested with	500 V DC	500 V DC	2500 V DC
tested with
● Channels against backplane bus and load voltage L+				1500 V AC	1500 V AC
● Load voltage L+ against backplane bus				500 V DC	500 V DC
Altitude during operation relating to sea level
● Ambient air temperature-barometric pressure-altitude				Tmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax - 20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)	Tmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax - 20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)
Dimensions
Width	15 mm	15 mm	15 mm	15 mm	15 mm
Height	81 mm	81 mm	81 mm	81 mm	81 mm
Depth	52 mm	52 mm	52 mm	52 mm	52 mm
Weights
Weight, approx.	40 g	40 g	37 g	50 g	50 g

Article number	6ES7132-4BF50-0AA0	6ES7132-4BD50-0AA0	6ES7132-4HB50-0AB0
	ET200S, 8DO SINK OUTPUT DC24V/0,5A	ET200S,4DO SINK OUTPUT DC24V/0,5A , 5PCS	ET200S,2RO,DC48V/AC230V,MANUAL ACTUATION
Supply voltage
Reverse voltage protection	Yes; when using the same correctly polarized load voltage as on the power module	Yes; when using the same load voltage as on the power module
Load voltage L+
● Rated value (DC)	24 V; From power module	24 V; From power module	24 V; From power module
● Reverse polarity protection	Yes	Yes	Yes
Input current
from load voltage L+ (without load), max.	5 mA	5 mA; Per channel	30 mA
from backplane bus 3.3 V DC, max.	10 mA	10 mA	10 mA
Power loss
Power loss, typ.	1.5 W	0.8 W	0.6 W
Address area
Address space per module
● with packing		4 bit	2 bit
● without packing	1 byte	1 byte	1 byte
Digital outputs
Number of digital outputs	8	4	2
Short-circuit protection	Yes	Yes	No
● Response threshold, typ.	1.5 A
Limitation of inductive shutdown voltage to	Typ. 47 V		No
Controlling a digital input	Yes	Yes	Yes
Switching capacity of the outputs
● on lamp load, max.	5 W	5 W
Load resistance range
● lower limit	48 ?	48 ?
● upper limit	3 400 ?	3 400 ?
Output voltage
● for signal "1", min.	Max. 1 V	1 V
Output current
● for signal "1" rated value	0.5 A	0.5 A	5 A
● for signal "1" permissible range, min.	5 mA	5 mA
● for signal "1" permissible range, max.	600 mA	600 mA
● for signal "1" minimum load current			8 mA
● for signal "0" residual current, max.	5 μA	5 μA
Output delay with resistive load
● "0" to "1", max.	300 μs	300 μs
● "1" to "0", max.	600 μs	600 μs
Parallel switching of two outputs
● for uprating	No	No
● for redundant control of a load	Yes; per module	Yes; per module
Switching frequency
● with resistive load, max.	100 Hz	100 Hz	2 Hz
● with inductive load, max.	0.5 Hz	0.5 Hz	0.5 Hz
● on lamp load, max.	10 Hz	10 Hz	2 Hz
Total current of the outputs
● Current per module, max.	4 A	2 A
Relay outputs
Switching capacity of contacts
— Thermal continuous current, max.			5 A
Cable length
● shielded, max.	1 000 m	1 000 m	1 000 m
● unshielded, max.	600 m	600 m	600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	Yes	No
Interrupts/diagnostics/status information
Diagnostic functions	No	No	No
Substitute values connectable			Yes; 0/1
Diagnostics indication LED
● Status indicator digital output (green)	Yes	Yes	Yes
Parameter
Remark	3 byte	1 byte
Response to CPU/master STOP			Substitute a value/keep last value
Potential separation
Potential separation digital outputs
● between the channels	No	No	Yes
● between the channels and backplane bus	Yes	Yes	Yes
● Between the channels and load voltage L+			Yes
Isolation
Isolation tested with	500 V DC	500 V DC
tested with
● Channels against backplane bus and load voltage L+			1500 V AC
● Load voltage L+ against backplane bus			500 V DC
Altitude during operation relating to sea level
● Ambient air temperature-barometric pressure-altitude			Tmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax - 20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)
Dimensions
Width	15 mm	15 mm	15 mm
Height	81 mm	81 mm	81 mm
Depth	52 mm	52 mm	52 mm
Weights
Weight, approx.	40 g	40 g	50 g

在线询盘/留言

*您的姓名：

*联系手机：

*固定电话：

*联系邮箱：

*所在单位：

*需求数量：

咨询内容：

您要求给厂家提供：

产品推荐

精品推荐