BE蓄电池PL12-80/12V80AH检测仪器专用
技术特点
1.长寿命,低放电:特殊合金配方,加厚板栅设计及极板固化工艺,使电池在深放电条件依然
能保持长寿命。
2.双排防爆阻燃,滤酸安全阀设计,能有效释放多余气体,隔断电源,确保用户使用安全。
3.端子密封采用专利多层密封技术,严格避免使用过程中端子爬酸。
4.放射型板栅和新配方活性物质的使用,大大提高了电池的高倍率放电性能。
5.高纯度的原材料和清洁的生产环境,降低了电池的自放电延长了电池的使用寿命
蓄电池应用领域与分类:
免维护无须补液; UPS不间断电源;
内阻小,大电流放电性能好; 消防备用电源;
适应温度广; 安全防护报警系统;
自放电小; 应急照明系统;
使用寿命长; 电力,邮电通信系统;
荷电出厂,使用方便; 电子仪器仪表;
安全防爆; 电动工具,电动玩具;
,深放电恢复性能好; 便携式电子设备;
无游离电解液,侧倒仍能使用; 摄影器材;
产品通过CE,ROHS认证,所有电池 太阳能、风能发电系统;
符合国家标准。 巡逻自行车、红绿警示灯等
技术特点
- 高品质铅锡钙合金板栅涂膏式厚极板确保低腐蚀和高性能
- 电解液固定于胶体结构中,完全填充极板间从顶部到底部的间隙
- 有着极高孔率和非常低的内部电阻的隔板
- 符合IEC 707 FV0标准的阻燃ABS塑料外壳
- 外壳和中盖的设计保证了高的机械强度
- 螺母式M8/M10 铜芯端子保证了高的电导率,短的安装时间和扭矩保持力
- 滤气片排出了多余的气体同时阻止了火花或明火进入电池内部
- 低压开启安全阀
产品特点
1、安全性能好:正常使用下无电解液漏出,无电池膨胀及破裂。
2、放电性能好:放电电压平稳,放电平台平缓。
3、耐震动性好:完全充电状态的电池完全固定,以4mm的振幅,16.7Hz的频率震动1小时,无漏液,无电
池膨胀及破裂,开路电压正常。
4、耐冲击性好:完全充电状态的电池从20cm高处自然落至1cm厚的硬木板上3次。无漏液,无电池膨胀
及破裂,开路电压正常。
5、耐过放电性好:25摄氏度,完全充电状态的电池进行定电阻放电3星期(电阻值相当于该电池1CA放
电要求的电阻),恢复容量在75%以上。
6、耐过充电性好:25摄氏度,完全充电状态的电池0.1CA充电48小时,无漏液,无电池膨胀及破裂,开
路电压正常,容量维持率在95%以上。
7、耐大电流性好:完全充电状态的电池2CA放电5分钟或10CA放电5秒钟。无导电部分熔断,无外观
变形。
specifically for critical standby applications. The EnerGEL battery is designed for low maintenance standby applications where it is kept0n a float charge and is ready for instantaneous use whenever there is a mains power system failure. It is a fact that battery life is generally halved the with every 10o C increase in average operating temperature. Battery Energy and CSIRO developed SuperGEL technology which focuses0n providing a product with superior life performance. The SuperGEL battery technology is based0n unique chemical and molecular characteristics, and differentiated production techniques, compared to regular gel batteries. This is characterised by features such as very low float currents and high operating efficiency. The superior life characteristics apply to the performance of the battery under varying extreme climatic conditions. The robust construction allows it to withstand both electrical abuse as well as vibration and physical abuse during transport, installation or operation. EnerGEL is typically used to support mission critical applications and services or critical elements of revenue generating technology. EnerGEL will deliver a reliable service with a long operating life based0n it's unique blend of physical, structural and chemical characteristics. For this reason EnerGEL is possibly the world’s leading standby batteries from Battery Energy using revolutionary SuperGEL long life plate technology has been designed specifically for solar applications. Solar batteries are traditionally hard working batteries and are usually cycled0n a daily basis as part of a primary power source of electricity where no grid power is available. When the CSIRO and Battery Energy developed SuperGEL technology, they focused0n developing a product with superior life characteristics. Although the SuperGEL battery technology is based0n previous gel technology, it uses unique chemical and molecular characteristics and differentiated production techniques from regular gel superior characteristics of SunGEL batteries have been tested and verified by the CSIRO in a number of independent tests the results of which prove the superiority of SunGEL batteries under the most extreme test conditions. It typically out-performs other gel batteries by a factor of between 2 and 3, subject to applications are often remotely located and installed in the most extreme environmental conditions. To deliver a reliable service with a long operating life requires a unique blend of physical, structural and chemical characteristics. For this reason SunGEL is possibly the world's best solar batteries from Battery Energy incorporate SuperGEL long life plate technology and lock bonded manufacturing techniques to produce vibration resistant long life batteries that have been specifically developed for rolling stock applications. Railway applications consist of two main requirements, either starting the locomotive or providing standby support for the carriages. They are characterized by fairly difficult environments, including high vibration and variable-charging characteristics, which frequently can leave the batteries in a semi discharged state.