商铺名称：深圳市福邦辰润滑油有限公司
联系人：方经理（先生）
联系手机：
固定电话：
企业邮箱：fbcrhy@163.com
联系地址：广东省深圳市宝安区沙井接到新桥工业园
邮编：
联系我时，请说是在地方电气网上看到的，谢谢！
商品详情
-
Good oxidation stability and good resistance to ageing
-
Powerful EP properties and very good wear protection
-
Excellent corrosion protection
-
Rapid air release and low foaming
-
Good demulsification characteristics
- Good compatibility with sealing materials
RENOLIN ZAF B
Zinc- and Ash-Free HM Hydraulic Oils and CKC Lubricating Oils
Zinc- and Ash-Free HM Hydraulic Oils and CKC Lubricating OilsZinc-free hydraulic oils have steadily gained popularity over the last few years.
In many cases, the use of a zinc-free hydraulic oil is a must, especially in machine tools where hydraulic fluids can contaminate metalworking fluids. RENOLIN ZAF B hydraulic oils are zinc- and ash-free HM hydraulic oils complying with ISO 6743-4.
The most important features of RENOLIN ZAF B hydraulic oils are:
RENOLIN ZAF B products are high-grade HM hydraulic oils according to ISO 6743-4 which can be used in all hydraulic systems but also as CKC lubricating oils according to ISO 6743-6 in gearboxes, bearings and circulating systems. RENOLIN ZAF B products are recommended for use in machine tools where contact between hydraulic oils and metalworking fluids can take place.
| RENOLIN ZAF | 32 B | 46 B | 68 B | ||
| Hydraulic oil type | |||||
| acc. to ISO 6743-4 | HM 32 | HM 46 | HM 68 | ||
| acc. to DIN 51 502 | HLP 32 | HLP 46 | HLP 68 | ||
| Lubricating oil type | |||||
| acc. to ISO 6743-6 | CKC 32 | CKC 46 | CKC 68 | ||
| acc. to DIN 51 502 | CLP 32 | CLP 46 | CLP 68 | ||
| Characteristics | Unit | Test method | |||
| Colour | 1 | 1 | 1 | ASTM D 1500 | |
| Kinematic viscosity | |||||
| at 40 °C | mm2/s | 31.5 | 45 | 65.4 | ASTM D 445 |
| at 100 °C | mm2/s | 5.3 | 6.7 | 8.4 | ASTM D 445 |
| Viscosity index | 98 | 101 | 98 | ASTM D 2270 | |
| Density at 15 °C | kg/l | 0.878 | 0.878 | 0.885 | ASTM D 1298 |
| Flash point, Cleveland open cup | °C | 215 | 230 | 230 | ASTM D 92 |
| Pour point | °C | -30 | -27 | -21 | ASTM D 97 |
| Neutralization number | mg KOH/g | 0.3 | 0.3 | 0.3 | ASTM D 974 |
| Saponification number | mg KOH/g | 1.3 | 1.3 | 1.3 | ASTM D 94 |
| Water content | % mass | not traceable | not traceable | not traceable | ASTM D 95 |
| Insolubles | % mass | not traceable | not traceable | not traceable | DIN 51 592 |
| Demulsification | min | 10 | 10 | 15 | DIN 51 599 |
| Air release at 50 °C | min | 3 | 8 | 7 | ASTM D 3427 |
| Foaming, | |||||
| seq. I | ml | 30/0 | 50/0 | 50/0 | ASTM D 892 seq. I-III |
| seq. II | ml | 20/0 | 20/0 | 20/0 | ASTM D 892 seq. I-III |
| seq. III | ml | 20/0 | 20/0 | 20/0 | ASTM D 892 seq. I-III |
| Copper corrosion | degree of corr. | 1a-100A3 | 1a-100A3 | 1a-100A3 | ASTM D 130 |
| Rust prevention | pass A | pass A | pass A | ASTM D 665 | |
| Ageing behaviour, increase in neutralization number after 1000 h | mg KOH/g | < 2 | < 2 | < 2 | ASTM D 943 |
| Brugger boundary friction test | N/mm2 | 38 | DIN 51 347 (D) | ||
| FZG mechanical gear rig test | load stage | > 12 | > 12 | > 12 | DIN 51 354-2 |
| Vickers vane pump test, loss of mass | |||||
| on ring | mg | 120 | 120 | 120 | IP 281 |
| on vanes after 250 h | mg | 30 | 30 | 30 | IP 281 |
| Effect on SRE-NBR 1 seal material acc. to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours, |
在线询盘/留言
