商铺名称:上海标卓科学仪器有限公司
联系人:王经理()
联系手机:
固定电话:
企业邮箱:
联系地址:中国上海奉贤区 上海市奉贤区扶港路1088号2幢1218室
邮编:
联系我时,请说是在地方电气网上看到的,谢谢!
上海标卓科学仪器有限公司15002100776<\/strong><\/span>是仪器仪表行业的新锐企业,检测仪器设备的生产、销售、维修、计量管理于一体的综合型公司。公司生产整套完整的精密测量仪器及相关解决方案,并代理、经销国内外几百家知名品牌的检测仪器和机械设备。主要涉及:机械设备检测仪器、长度类、力学类、电学类、试验类、光学类、精密量仪类、无损测试、理化分析、教学仪器、专用量仪及环境试验设备仪器等等系列,销售产品达成千上万多种,为企业质量管理及企业认证提供完善硬件设备的一条龙服务。 <\/span><\/span> <\/span><\/p> 联系人:王经理<\/span><\/strong><\/span><\/p> 手机 <\/span>15002100776<\/span><\/strong><\/span><\/p> 联系电话:021-61523869<\/span><\/strong><\/span><\/p> 地址: <\/span><\/span>上海闵行区向阳工业园颛兴东路1528<\/span>号<\/span><\/strong><\/span><\/p> <\/span><\/p> <\/span><\/p> <\/span><\/p><\/span> 一、产品特点介绍:<\/span><\/span><\/font><\/p> 1<\/span>、电杆荷载位移测试仪配置一个液晶显示窗口显示日期<\/font><\/span>/<\/span>时间,荷载拉力,位移和峰值,显示加载速度,显示电池电量,<\/font><\/span> 二、技术参数:<\/span><\/span><\/font><\/p> 1.<\/span>用途:<\/font><\/span> <\/span>测量:<\/font><\/span> 5-900 KN<\/span>以内荷载力测试。<\/font><\/span> 三、使用方法:<\/span><\/span><\/font><\/p> 1. <\/span>先用五芯电缆信号线将选择的荷载传感器和测试仪后面板左边<\/font><\/span>“<\/span>力信号输入<\/font><\/span>\"<\/span>插口联接。(把前面板上的拔动拔至选择的传感器量程如<\/font><\/span>50KN<\/span>或<\/font><\/span>200KN<\/span>)调零后显示<\/font><\/span>000KN<\/span>。<\/font><\/span> 四、保管与维修:<\/span><\/span><\/font><\/p> 1. <\/span>数显荷载位移测试仪属于精密电子仪器,使用前应对仪器有充分了解,应对测试方法相当熟悉。<\/font><\/span>
<\/span> <\/span>
<\/span><\/span> <\/span>公司一直推行:同质量比价格、同价格高质量的经营理念,赢得了广大用户的普遍赞誉和支持。建立了完善的营销服务网络与服务体系!公司拥有雄厚的资金实力和售前、售中、售后的技术服务力量,始终以“<\/span>热诚服务、务实进取、奋发开拓\"<\/span>的原则作为发展宗旨,以“<\/span>顾客始终满意\"<\/span>为目标与您携手共进!<\/span><\/span><\/p>
2<\/span>、可以配置**<\/font><\/span>3<\/span>个拉力传感器和<\/font><\/span>1<\/span>个大位移传感器。拉力最小显示<\/font><\/span>0.01KN<\/span>。位移测量显示<\/font><\/span>0.1mm<\/span>。可在强光下清晰显示液晶有背光在黑夜也可清晰显示。<\/font><\/span>
3<\/span>、电杆荷载位移测试仪采用电池供电,可以重复充电使用。<\/span><\/span><\/font><\/p>
<\/span>测量:<\/font><\/span> 500—3000 mm <\/span>以内的位移测量。<\/font><\/span>
<\/span>(最小显示单位<\/font><\/span> 0.1 mm<\/span>)<\/font><\/span>
2.<\/span>力显示单位<\/font><\/span> <\/span>读数为<\/font><\/span>0.01KN<\/span>,读数超过<\/font><\/span>100KN<\/span>显示<\/font><\/span>0.1KN
3.<\/span>显示光源:常亮<\/font><\/span>
4.<\/span>测量精度<\/font><\/span> ≤ 1%.<\/span>读数<\/font><\/span>±1<\/span>字<\/font><\/span>
5.<\/span>显示调零<\/font><\/span> <\/span>自动调零<\/font><\/span>
6.<\/span>数据存储数量<\/font><\/span> 999<\/span>条<\/font><\/span>
7. <\/span>电池电压<\/font><\/span> DC12V
8. <\/span>本仪表正常使用时间大约<\/font><\/span>5—6<\/span>小时(电池使用时间长短和充电,年限有关)<\/font><\/span>
9. <\/span>使用环境<\/font><\/span> -5<\/span>℃<\/font><\/span> <\/span>~<\/font><\/span>+45<\/span>℃<\/span>、<\/span><\/font>80%<\/span>(相对湿度)<\/span><\/span><\/font><\/p>
2. <\/span>把位移传感器和位移信号线旋接。另一头和测试仪后面板(位移输入)插座相连。<\/font><\/span>
3. <\/span>将专用电源插座与测试仪后面板(<\/font><\/span>220V<\/span>电源)插座插接,与<\/font><\/span>220V<\/span>电源相连。<\/font><\/span>
4. <\/span>按前面板(电源开关)灯亮,液晶显示数字。<\/font><\/span>
5. <\/span>此时旋贰窗口下调零旋钮,各调至<\/font><\/span>000
6. 00mm<\/span>位移传感器应显示为<\/font><\/span>000mm
7. <\/span>荷载窗口显示读数<\/font><\/span>50KN<\/span>传感器为<\/font><\/span>00.000KN
<\/span>从开机到工作时,应有<\/font><\/span>15<\/span>分钟预热过程,待数字稳定后开始工作。<\/span><\/span><\/font><\/p>
2. <\/span>仪器不用时,传感器应拆下与其它附件一起装入包装箱内。<\/font><\/span>
3. <\/span>包装箱应放在干燥和无油污的地方。<\/font><\/span>
4. <\/span>本仪器应轻拿、轻放、防止强震动。<\/font><\/span>
5. <\/span>保险丝在测试仪后面板,电源插座内(或保险丝座内),用小一字罗丝刀打开容量<\/font><\/span>1A<\/span>。<\/font><\/span>
6. <\/span>本仪器切不可自行打开,以免影响测试精度。<\/font><\/span>
7. <\/span>